search

Schöck Tronsole® type L

Schöck Tronsole® type L: For insulating impact sound at the joint between stairs and wall

Load-bearing Schöck Tronsole® types can be upgraded to surrounding soundproof systems using Schöck Tronsole® type L. Sound insulation measures can only be effective if all joints between staircase wall and staircase (steps and landing) remain free from soiling. All sound insulation performance figures for Schöck Tronsole® types relate to systems incorporating type L in the joint areas. Alternatively, a sufficiently wide architectural air joint is also possible. It must, however, be wide enough to prevent acoustic bridges forming when dirt drops through.

Benefits
  • Available in two heights: 420 mm and 250 mm
    For optimised adjustment to standard tread and landing slab thicknesses.
  • Full-surface adhesive strip
    For simple, quick and secure installation
  • Cost-efficient L kit available
    15x type L joint panels, adhesive tape, cutter and pen
  • Suitable for emergency exits
    Confirmed in the fire safety certificate
Staircase systems
Hear the difference.
Impact sound insulation compared.

For the first time, DIN 7396 describes clear test conditions for measuring the acoustic properties of impact soundproofing elements. Tests are performed on common staircase geometries and under the loads usually occurring in buildings. The characteristic values specified in DIN 7396 can be used for soundproofing certification according to DIN 4109. All Schöck Tronsole® types have been tested using this procedure.

BIL_MA_Willetts--Dominic-2017_16z9_FHD.jpg
If you have any questions or require a personal consultation, please contact:

Hotline for design support services

Phone: +49 7223 967 144

E-Mail: export@schoeck.com