Schöck Tronsole® type Q

Schöck Tronsole® type Q enables acoustically insulated connections between winding staircases and staircase walls. Its compact design makes Schöck Tronsole® type Q easy to install in winding stairs.

read more
Schöck Tronsole® type Q: Impact sound insulation element for connecting winding staircases to walls.
Benefits
  • Schöck Elodur® elastomer support
    Ensures an impact sound level delta of ∆Lw* ≥ 27 dB to ∆Lw* ≥ 33 dB on all products, tested to DIN 7396.
  • Optional fire protection kit
    Complies with the requirements of fire resistance class R90 up to a joint width of 65 mm
  • Flexible application
    Even fits treads that are 120 mm thick
  • More potential applications
    Can even be used with joints up to 100 mm.
  • Suitable for emergency exits
    Confirmed in the fire safety certificate
  • Adapts to inclination
    Rotatable load-bearing element with tongue and groove to ensure correct positioning makes installation easier.
  • Load-bearing integration
    Hanging loop on collet for load-bearing integration and correct positioning - increases execution reliability.
Staircase systems
+ + + +

Type F-V1

Type F-V1

Type L

Type Q

Schöck Tronsole® type Q: Impact sound insulation element for connecting winding staircases to walls.
Tronsole® type Q

Impact sound insulation element for connecting winding staircases to walls.

Go to type Q

Schöck Tronsole® type L: For insulating impact sound at the joint between stairs and wall
Tronsole® type L

For insulating impact sound at the joint between stairs and wall.

Go to type L

Schöck Tronsole® type F: Impact sound insulation element for connecting staircases to landings with corbel support.
Tronsole® type F-V1

Impact sound insulation element for connecting staircases to landings with corbel support.

Go to type F

Winding staircase
Acoustic insulation of winding stairs to landing using Schöck Tronsole® type F, and to wall using Tronsole® type Q. Tronsole® type L is used for the joint. This produces the blue line around the acoustically insulated staircase – a seal of quality for superior impact sound insulation.
Winding staircase
Winding staircase

Impact sound insulation element for connecting winding staircases to walls.

Go to type Q

For insulating impact sound at the joint between stairs and wall.

Go to type L

Impact sound insulation element for connecting staircases to landings with corbel support.

Go to type F

Elastomer bearing

Schöck Elodur® is an elastomer bearing that was developed specifically for impact sound insulation. It is the key component in Schöck Tronsole®. In the case of the Tronsole® type Q, the Elodur® has the form of a studded bearing and is used for the point connection of spiral staircases. Unlike conventional impact sound insulation supports, Schöck Tronsole® achieves an improvement of about 10 dB in impact sound insulation performance by using the elastomer bearing, Schöck Elodur®. This is approximately equivalent to about half the perceived loudness level.

Detail-Tronsole-Q-partW-Elastomer_V1.jpg
Downloads
Technical manuals
Technical Information Schöck Tronsole® type Q
pdf, 9,46 MB
(09/04/2020)