Schöck Tronsole® type T

Schöck Tronsole® type T can be used for acoustically insulated connections between in-situ concrete or prefabricated stairs and in-situ concrete or element landings. The range covers all landing thicknesses and stair widths. Connections do not require corbels. For sophisticated architectural designs.

read more
Impact sound insulation element for connecting staircases to landings with a straight joint
Benefits
  • Schöck Elodur® elastomer support
    Ensures an impact sound level delta of ∆Lw* ≥ 27 dB to ∆Lw* ≥ 33 dB on all products, tested to DIN 7396.
  • Fire resistance class R90
    Complies with the requirements for fire resistance class R90 (subject to appropriate on-site additional reinforcement of the landing)
  • Suitable for emergency exits
    Confirmed in the fire safety certificate
  • Straight joint profile
    Enables straight joints and easy removal of formwork at the prefabricating plant or on site
  • Customised
    Type T can either be cut to length or ordered in the required length. Minimum lengths apply.
  • Integrated gripper
    For easy fastening to the formwork
Staircase systems
+ + + +

Type T-V4

Type T-V4

Type L

Type Z

Schöck Tronsole® type Z: Impact sound insulation element for connecting landings to staircase walls.
Tronsole® type Z

Impact sound insulation element for connecting landings to staircase walls.

Go to type Z

Schöck Tronsole® type L: For insulating impact sound at the joint between stairs and wall
Tronsole® type L

For insulating impact sound at the joint between stairs and wall.

Go to type L

Impact sound insulation element for connecting staircases to landings with a straight joint
Tronsole® type T-V4

Impact sound insulation element for connecting staircases to landings with a straight joint.

Go to type T

Straight staircase, insulated stairs and landing
Acoustic insulation of stairs to landing using Schöck Tronsole® type T, of landing to wall using Tronsole® type Z. Tronsole® type L insulates stairs to wall. This produces the blue line around the acoustically insulated staircase – a seal of quality for superior impact sound insulation.
Straight staircase, insulated stairs and landing
Straight staircase, insulated stairs and landing

Impact sound insulation element for connecting landings to staircase walls.

Go to type Z

For insulating impact sound at the joint between stairs and wall.

Go to type L

Impact sound insulation element for connecting staircases to landings with a straight joint.

Go to type T

Elastomer bearing

Schöck Elodur® is an elastomer bearing that was developed specifically for impact sound insulation. It is the key component in Schöck Tronsole®. In the case of the Tronsole® type T, the Elodur® elastomer bearing is integrated in the support corbels for acoustic decoupling. Unlike conventional impact sound insulation supports, Schöck Tronsole® achieves an improvement of about 10 dB in impact sound insulation performance by using the elastomer bearing, Schöck Elodur®. This is approximately equivalent to about half the perceived loudness level.

Detail-Tronsole-T-V4-H200-L1000-Elastomer_V1.jpg
Downloads
Technical manuals
Technical Information Schöck Tronsole® type T
pdf, 11,16 MB
(09/04/2020)